|
|
|
Load Volume Scanner Specifications
General Specifications
|
|
Measurement Range (per tray)
|
0 – 130 m3 / 0 – 170 yd3
(0.5 – 65 m3 for trade legal use within New Zealand.
1 – 35 m3 for trade legal use within Australia)
|
|
Measurable Vehicle Types
|
Conventional (rectangular bodied) open tray on-road trucks, truck-trailers, semi-trailers (articulated) and bottom dumpers (bottom dump, centre dump); Off-highway dumpers, underground mine trucks, rigid body dump trucks and articulated dump trucks (max 3.3m wide, 4.2m high for standard LVS system. Custom mounting required for larger trucks); solid sided rectangular tractor trailers.
|
|
Measurable Tray Capacity
|
1.5 – 130.0 m3 / 2.0 – 170.0 yd3
(minimum 3.0 m3 for trade legal use within New Zealand)
|
|
Measurable Load Types
|
Flowable solids (particulate bulk materials) including:
rock aggregates, gravel, lightweight aggregates, sand, soil, clay, spoil, compost, bark, wood-chip, mulch and other garden/landscaping specialty mixes, fertilizer, shredded scrap steel/waste.
|
|
Maximum Load Particle Diameter (average)
|
200 mm / 7.8"
|
|
Measurement Resolution
|
0.1 m3 / 0.1 yd3
(0.05 m3 below 2.5 m3 measured volume for New Zealand only)
|
|
Typical Measurement Accuracy
|
Better than 1% to limit of resolution
|
|
Vehicle Speed (during scanning)
|
0.5 – 6.0 km/h / 0.3 – 3.7 mph
|
|
Power Requirements
|
110 – 240VAC, 50/60Hz, 4A max
|
|
Laser Protection Class
|
Class 1 (eye-safe)
|
|
Clearance (from Ground)
|
5.0 m / 16.4' minimum (depends on mounting system and type of vehicles to be scanned).
|
| |
Rated Operating Conditions
|
|
Operating Temperature
|
-30 – 50 oC / -22 – 122 oF (Scan Head, LED Message Board)
0 – 45 oC / 32 – 113 oF (Operator Interface console, printer)
|
|
Minimum Visibility
|
50 m / 164' (dense fog)
|
|
Maximum Scan-Track Gradient
|
5 degrees (9%)
|
|
Maximum Scan-Track Camber
|
3 degrees (5%)
|
|
|
